Search results for: 'stage 1'

Looking for an easy way to switch over to air suspension without breaking the bank? The Stage 1 front kit is an inexpensive and simple way to do just that! The Stage 1 front kit is designed to replace the factory steel coil spring with an air spring while maintaining the factory control arms. C10 SHOP EXCLUSIVE! Learn More

The Porterbuilt Stage 1 rear kit is both an economical and easy way to lower the rear of your 63-72 C10′s trailing arm suspension. The air spring and mounting plates replace the factory steel coil spring, allowing a better ride quality and adjustability! The Stage 1 shock relocator brackets improve shock function by decreasing the shock angle! C10 SHOP EXCLUSIVE! Learn More

The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!

Ride Height - 7"

Learn More

The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approximately 7-8" off of the ground at ride height.

Ride Height - 7-8"

---

Learn More

The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approximately 7-8" off of the ground at ride height.

Ride Height - 7-8"

---

Learn More

Elbow Male - 1/4" npt x 1/4" PTC Air Fitting (DOT Approved) - KV2L07-35S Learn More

KYB Shock Kit - 1924202
Includes 2 shocks plus mounting hardware. Learn More

KYB Shock Kit - 1924426
Includes 2 shocks plus mounting hardware. Learn More

1/4" npt Plugs - 5 Pack Learn More

Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY

Learn More

Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!

Learn More

Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
1" FORWARD & 1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!

Learn More

Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
1" FORWARD & 1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!

Learn More

Elbow Male - 1/2" npt x 3/8" PTC Air Fitting (DOT Approved) - KV2L11-37S Learn More

Elbow Male - 1/4" npt x 3/8" PTC Air Fitting (DOT Approved) - KV2L11-35S Learn More

Elbow Male - 3/8" npt x 1/4" PTC Air Fitting (DOT Approved) - SMC KV2L07-36S Learn More

The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the lowest point of the factory frame rails approximately 3" off of the ground when fully deflated.

Ride Height - 6-7"
Deflated Height - 3"

---

Learn More

The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the lowest point of the factory frame rails approximately 3" off of the ground when fully deflated.

Ride Height - 6-7"
Deflated Height - 3"

---

Learn More

These high quality coil springs from CPP come black powdercoated.
Available in stock height, 1" drop, 2" drop, or 3" drop. Learn More

The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!

Ride Height - 7"
Deflated Height - 3"

Learn More

The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!

Ride Height - 7"
Deflated Height - 3"

Learn More

New Boxed Inner Frame Stiffener for Level 1 Dropmember, Static & Stock Suspension Trucks
Fits 1963-72 C10 Trucks Learn More

CPP Modular 2-1/2" Drop Spindles Only, pair Learn More

Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY

Learn More

CPP C10 Disc Brake 2.5" Drop Spindles Only, pair
Learn More

Ridetech TQ Series coilovers for the 1963-72 Chevy C10 Trucks
Sold in pairs.
Includes springs. Learn More

Includes Four SMC 3/8" PTC Fittings (D.O.T. Approved)
5 Options available:
Four 1/2" npt x 3/8" PTC Air Fittings - Elbow Male
Four 1/2" npt x 3/8" PTC Air Fittings - Straight Male
Two 1/2" npt x 3/8" PTC Elbow & Two 1/2" npt x 3/8" PTC Straight
Two 1/2" npt x 3/8" PTC Elbow & Two 1/4" npt x 3/8" PTC Elbow
Two 1/2" npt x 3/8" PTC Straight & Two 1/4" npt x 3/8" PTC Elbow Learn More

The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

Ride Height - 5-6"

Learn More

Porterbuilt front swaybar for 1963-87 Version 7 Dropmember equipped trucks.
Fits Level 2 Coilover and Level 3 airbag kits only!
DOES NOT FIT LEVEL 1 DROPMEMBER KITS! Learn More

CPP coil spring kits include front and rear coils.
Available in stock height, 1" drop, 2" drop, or 3" drop front springs.
Available in stock height, 3" drop, 4" drop, or 5" drop rear springs. Learn More

Wilwood Forged Narrow Superlite 6R Front Brake Kit
12" 1 Piece Rotor and Hats, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
15" Minimum Wheel Diameter

* FOR USE WITH WILWOOD C10 STEEL SPINDLES

Learn More

Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
12" 1 Piece Rotor and Hats, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
15" Minimum Wheel Diameter

* FOR USE WITH WILWOOD C10 STEEL SPINDLES

Learn More

Porterbuilt's 1960-62 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.

When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front Coilover system will set the lowest point of the factory frame rails approx. 5-6" inches off the ground at ride height.

Learn More

These high quality coil springs from CPP come black powdercoated.
Available in stock height, 1" drop, 2" drop, or 3" drop. Learn More

These high quality coil springs from CPP come black powdercoated.
Available in stock height, 1" drop, 2" drop, or 3" drop. Learn More

These high quality coil springs from CPP come black powdercoated.
Available in stock height, 1" drop, 2" drop, or 3" drop. Learn More

CPP Modular Drop Spindle Big Brake Wheel Kits
1960-87 Trucks
13" Rotors
2 Piston Caliper
5 or 6 Lug

Learn More

The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.

Ride Height - 5-6"

---

Learn More

The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.

Ride Height - 5-6"

---

Learn More

The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.

Ride Height - 5-6"

---

Learn More

Stainless Steel Exhaust Hanger
5" long
Fits 2.5" exhaust pipe
Weld-on Learn More

Stainless Steel Exhaust Hanger
5" long
Fits 2" exhaust pipe
Weld-on Learn More

Stainless Steel Exhaust Hanger
5" long
Fits 3" exhaust pipe
Weld-on Learn More

Stainless Steel Exhaust Hanger
5" long
Fits 3.5" exhaust pipe
Weld-on Learn More

Stainless Steel Exhaust Hanger
5" long
Fits 4" exhaust pipe
Weld-on Learn More

Stainless Steel Exhaust Hanger
5" long
Fits 5" exhaust pipe
Weld-on Learn More

Boyd 12 Bolt EFI to Aeromotive 10 Bolt Stealth Adapter Plate
Part #: 44032
Learn More

These stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LS swap in your 1963-87 Chevy truck.

Learn More

These longtube stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LS swap in your 1963-87 Chevy truck.

Learn More

These stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LT swap in your 1963-87 Chevy truck.

Learn More

Cap:
- Material = 6061 CNC Machined Aluminum
- Threads = 11.5" TPI
- Vented= NO
- Lanyard = NO
- Gasket = Buna O-ring

Neck:
- Material= 6061 CNC Machined Aluminum
- Threads= 11.5"
- OD = 4.975" Overall Flange
- ID = 3.300 ID
- Overall Height = 2.5"
- Bolt Hole = x6 .201 THRU 4.350" BCL
Learn More

Ridetech HQ Coilovers for 1963-72 Chevy C10 Trucks
Sold in pairs.
Includes springs. Learn More

Low Profile LT Oil Pan Kit
LT GEN V, A BODY, G BODY
Fits LT1, LT4, L83, L86, 5.3L, 6.2L
Dropmember Compatible Learn More

CPP Modular Spindle Front Brake Kit
12" Rotors, Drilled & Slotted Available
2 Piston Calipers
18" Minimum Wheel Diameter Learn More

The Accuair Starter Package is going to include an ENDO-T air tank and an e+ Connect which includes an ECU+, wireless switch box, and e-Level+ app. This is the perfect introductory kit for anyone looking to get a high-quality air management system without breaking the bank. Learn More

CPP Modular Spindle Front Brake Kit
12" Rotors, Drilled & Slotted Available
2 Piston Calipers, Wilwood Upgrade Available
18" Minimum Wheel Diameter Learn More

CPP Modular Spindle Front Brake Kit
12" Rotors, Drilled & Slotted Available
2 Piston Calipers, Wilwood Upgrade Available
18" Minimum Wheel Diameter Learn More

CPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Black Calipers
18" Minimum Wheel Diameter Learn More

CPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Red Calipers
18" Minimum Wheel Diameter Learn More

CPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Red Calipers
18" Minimum Wheel Diameter Learn More

CPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Black Calipers
18" Minimum Wheel Diameter Learn More

CPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Black Calipers
18" Minimum Wheel Diameter Learn More

CPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Red Calipers
18" Minimum Wheel Diameter Learn More

Wilwood Flexline Kit, 22"
Stainless Steel Braided Brake Line Kit
Learn More

Wilwood Flexline Kit, 14"
Stainless Steel Braided Brake Line Kit
Learn More

DROPMEMBER COMPATIBLE

The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!
Designed to replace OEM Shock Absorbers. Sold Individually

Learn More

Wilwood Flexline Kit, 18"
Stainless Steel Braided Brake Line Kit
Learn More

DROPMEMBER COMPATIBLE

The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!
Designed to replace OEM Shock Absorbers. Sold Individually

Learn More

Low Profile Oil Pan Kit
LSX Engine, F-Body Oil Pan
Fits 4.8L, 5.3L, 6.0L, 6.2L
Dropmember Compatible
Learn More

7" Dual Diaphragm Brake Booster with optional Wilwood Aluminum Tandem Master Cylinder Kit
Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
Master Cylinder includes proportioning valve and bracket
Learn More

7" Dual Diaphragm Brake Booster with optional Wilwood Aluminum Tandem Master Cylinder Kit
Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
Master Cylinder includes proportioning valve and bracket
Learn More

The Accuair Premium Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, and height sensors. This is the perfect mid-level kit for anyone looking to get a high-quality air management system and programmable ride heights at an affordable price. Learn More

Air Lift Performance is proud to announce the second model from the brand new Dominator series line of air springs: the Dominator D2600! Featuring an unprecedented maximum restrained pressure of 600 psi, 9.7″ usable stroke, and a load range of 349-3055 lbs. This bad boy will give you the performance you crave. With more lift, a softer, smoother ride, and the lowest price in the industry, you can’t go wrong with the new Dominator D2600! Learn More

Air Lift Performance 3P combines pressure-based control with the ability to add ride-height sensing technology with the upgrade to height sensors. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems – instantly improving suspension control, performance, and vehicle ride flexibility.

Learn More

Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
14" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
18" Minimum Wheel Diameter

* FOR USE WITH WILWOOD C10 STEEL SPINDLES

Learn More

AccuAir’s Ultimate Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, ride height sensors, and a TouchPad+. This is the perfect top-of-the-line kit for anyone looking to get the best components for their air suspension management. Learn More

Product Number: 14040
Approx 19 Gallons

1973-87 Chevy C10
Bed Fill
Aeromotive In-Tank Pump

Learn More

Product Number: 14041
Approx 19 Gallons

1973-87 Chevy C10
Side Fill
Aeromotive In-Tank Pump

Learn More

Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
13" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter

* FOR USE WITH WILWOOD C10 STEEL SPINDLES

Learn More

Product Number: 14038
Approx 19 Gallons

1973-87 Chevy C10
Standard
Bed Fill
Non-EFI

* Pictures may show optional accessories installed. Depending upon the options you choose your tank may vary slightly from shown.

Learn More

Product Number: 14039
Approx 19 Gallons

1973-87 Chevy C10
Standard
Side Fill
Non-EFI

* Pictures may show optional accessories installed. Depending upon the options you choose your tank may vary slightly from shown.

Learn More

Product Number: 14003
Approx 19 Gallons

1963-72 Chevy C10
Side Fill
Aeromotive In-Tank Pump

Learn More

Product Number: 14004
Approx 19 Gallons

1963-72 Chevy C10
Bed Fill
Aeromotive In-Tank Pump

Learn More

Product Number: 14001
Approx 19 Gallons

1963-72 Chevy C10
Standard
Bed Fill
Non-EFI

* Shown With Optional Rollover Vent and Sending Unit Installed.

Learn More

Product Number: 14002
Approx 19 Gallons

1963-72 Chevy C10
Standard
Side Fill
Non-EFI

* Shown With Optional Rollover Vent and Sending Unit Installed.

Learn More

Wilwood Forged Narrow Superlite 6R Front Brake Kit
14" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
18" Minimum Wheel Diameter

* FOR USE WITH WILWOOD C10 STEEL SPINDLES

Learn More

Wilwood Forged Narrow Superlite 6R Front Brake Kit
13" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter

* FOR USE WITH WILWOOD C10 STEEL SPINDLES

Learn More

The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

Ride Height - 4"
Deflated Height - Lay Frame

Learn More

The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

Ride Height - 4"
Deflated Height - Lay Frame

Learn More