1963-72 GM Trucks

Filter
Set Descending Direction

27 Items

per page
View as List Grid
  1. Porterbuilt 1967-72 Hood Hinges

    The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed.

    Learn More
    $425.00
  2. Porterbuilt 1963-72 Fully Adjustable Trac-bar Kit

    If you are thinking about lowering your C10 truck more than four inches in the rear, a longer trac-bar will be a necessity! The Porterbuilt Fully Adjustable Trac-bar has an overall length of just over 34 inches. The longer the bar, the less side to side shift the differential will experience through suspension travel. The new mounting brackets also relocate the bar lowering the rear roll-center, and the bar length can be tuned while still mounted on the truck!

    Learn More
    $299.00
  3. Porterbuilt 1963-87 1" Narrowed Control Arms - Factory Crossmember

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
    1" NARROWED
    FOR FACTORY CROSSMEMBER ONLY!

    Learn More
    $1,099.00
  4. Porterbuilt 1963-72 C10 Front Dropmember - Level 3 Extreme

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  5. Porterbuilt 1963-72 C10 Rear Dropmember - Level 1 Mild, Airbag

    The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!

    Ride Height - 7"
    Deflated Height - 3"
    Learn More
    $2,399.00
  6. Porterbuilt 1963-72 C10 Rear Dropmember - Level 3 Extreme, Airbag

    The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4"
    Deflated Height - Lay Frame
    Learn More
    $2,399.00
  7. Porterbuilt 1963-72 C10 Rear Dropmember - Level 1 Coilover

    The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!

    Ride Height - 7"
    Learn More
    $2,399.00
  8. Porterbuilt 1963-72 C10 Rear Dropmember - Level 2 Coilover

    The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"
    Learn More
    $2,399.00
  9. Porterbuilt 1963-87 Transmission Crossmember
    Porterbuilt tubular transmission crossmember for 1963-87 Chevy trucks. Learn More
    $119.00
  10. Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, Airbag

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    1" NARROWED
    FOR VERSION 7 DROPMEMBER ONLY

    Learn More
    $1,099.00
  11. Porterbuilt Front Swaybar - Version 7 Dropmember
    Porterbuilt front swaybar for 1963-87 Version 7 Dropmember equipped trucks.
    Fits Level 2 Coilover and Level 3 airbag kits only!
    DOES NOT FIT LEVEL 1 DROPMEMBER KITS! Learn More
    $349.00
  12. Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, Coilover

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    1" NARROWED
    FOR VERSION 7 DROPMEMBER ONLY

    Learn More
    $1,099.00
  13. Porterbuilt Raised Bed Floor Mounts - 1963-72
    Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
    NOW INCLUDES MOUNTING BRACKETS FOR BOYD FUEL TANK Learn More
    $649.00
  14. Porterbuilt Battery Box, Driver Side
    Battery Box for Optima Yellow Top
    Driver Side Learn More
    $169.00
  15. Porterbuilt Battery Box, Passenger Side
    Battery Box for Optima Yellow Top
    Passenger Side Learn More
    $169.00
  16. Porterbuilt 1963-72 Rear Frame Crossmember, Tubular

    Tubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
    Learn More
    $119.00
  17. Porterbuilt 1963-72 Rear Frame Crossmember, Boxed

    New boxed rear frame crossmember fabricated from 3/16" steel.

    Fits: 1963-72 Chevy Trucks
    Learn More
    $169.00
  18. Porterbuilt 1963-72 C10 Front Dropmember - Level 1 Mild, Airbag

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the lowest point of the factory frame rails approximately 3" off of the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

    Learn More
    $1,399.00
  19. Porterbuilt 1963-72 C10 Front Dropmember - Level 2 Touring, Coilover

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.

    Ride Height - 5-6"

    Learn More
    $1,399.00
  20. Porterbuilt 1963-72 C10 Front Dropmember - Level 1 Mild, Coilover

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approximately 7-8" off of the ground at ride height.

    Ride Height - 7-8"

    Learn More
    $1,399.00
  21. PB Fab 1963-72 Boxed Trailing Arm Crossmember, 2 Piece Driveshaft

    Replace your factory trailing crossmember with this fabricated version from Porterbuilt with added ground clearance.

    Designed for a 2 piece driveshaft.

    Learn More
    $349.00
  22. PB Fab 1963-72 Trailing Arm Crossmember, 2 Piece Driveshaft

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Learn More
    $349.00
  23. PB Fab 1963-66 C10 Core Support Crossmember

    Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Learn More
    $119.00
  24. PB Fab 1967-72 C10 Core Support Crossmember

    Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Learn More
    $119.00
  25. Porterbuilt 1963-87 1" Forward & 1" Narrowed Control Arms - Factory Crossmember

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
    1" FORWARD & 1" NARROWED
    FOR FACTORY CROSSMEMBER ONLY!

    Learn More
    $1,099.00
  26. Porterbuilt Front Swaybar - 63-72 C10 Factory Crossmember
    Porterbuilt front swaybar for 1963-72 C10 Trucks running PB arms and a factory crossmember.
    Learn More
    $349.00
  27. Porterbuilt Front Swaybar - 73-87 C10 Factory Crossmember
    Porterbuilt front swaybar for 1973-87 C10 Trucks running PB arms and a factory crossmember.
    Learn More
    $349.00
Filter
Set Descending Direction

27 Items

per page
View as List Grid