Search results for: 'c10 style spindle'
- Did you mean
- c10 steel spindle
- c10 style single
- Related search terms
- C10 drop kit
- C10 suspension
- c10 ga tank
- C10 steel spindles
- C10 air ride kits
-
![]()
Porterbuilt 1963-72 Stage 1 Rear KitThe Porterbuilt Stage 1 rear kit is both an economical and easy way to lower the rear of your 63-72 C10′s trailing arm suspension. The air spring and mounting plates replace the factory steel coil spring, allowing a better ride quality and adjustability! The Stage 1 shock relocator brackets improve shock function by decreasing the shock angle! C10 SHOP EXCLUSIVE! Learn More$599.00 -
![]()
Porterbuilt 1963-87 1" Forward & 1" Narrowed Control Arms - Factory CrossmemberPorterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" FORWARD & 1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!$1,099.00 -
![]()
Porterbuilt 1963-87 1" Forward & 1" Narrowed Control Arms - Factory CrossmemberPorterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" FORWARD & 1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!$1,099.00 -
![]()
Porterbuilt 1963-72 Fully Adjustable Trac-bar KitIf you are thinking about lowering your C10 truck more than four inches in the rear, a longer trac-bar will be a necessity! The Porterbuilt Fully Adjustable Trac-bar has an overall length of just over 34 inches. The longer the bar, the less side to side shift the differential will experience through suspension travel. The new mounting brackets also relocate the bar lowering the rear roll-center, and the bar length can be tuned while still mounted on the truck!
Learn More$299.00 -
![]()
Dropmember LS Swap Stainless HeadersThese stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LS swap in your 1963-87 Chevy truck.
Learn More$329.00 -
![]()
Dropmember LS Swap Longtube Stainless HeadersThese longtube stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LS swap in your 1963-87 Chevy truck.
Learn More$449.00 -
![]()
Dropmember LT Swap Stainless HeadersThese stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LT swap in your 1963-87 Chevy truck.
Learn More$329.00 -
![]()
KYB Shock Kit - Stud/EyeKYB Shock Kit - 1924202
Includes 2 shocks plus mounting hardware. Learn More$165.00 -
![]()
KYB Shock Kit - Eye/EyeKYB Shock Kit - 1924426
Includes 2 shocks plus mounting hardware. Learn More$165.00 -
![]()
Porterbuilt 1963-87 Stage 1 Front KitLooking for an easy way to switch over to air suspension without breaking the bank? The Stage 1 front kit is an inexpensive and simple way to do just that! The Stage 1 front kit is designed to replace the factory steel coil spring with an air spring while maintaining the factory control arms. C10 SHOP EXCLUSIVE! Learn More$599.00 -
![]()
Porterbuilt Front Swaybar - Version 7 DropmemberPorterbuilt front swaybar for 1963-87 Version 7 Dropmember equipped trucks.
Fits Level 2 Coilover and Level 3 airbag kits only!
DOES NOT FIT LEVEL 1 DROPMEMBER KITS! Learn More$349.00 -
![]()
Porterbuilt 1960-62 Transmission CrossmemberPorterbuilt tubular transmission crossmember for 1960-62 Chevy trucks.
Learn More$119.00 -
![]()
Porterbuilt 1963-87 Transmission CrossmemberPorterbuilt tubular transmission crossmember for 1963-87 Chevy trucks. Learn More$119.00 -
![]()
Porterbuilt 1963-87 1" Narrowed Control Arms - Factory CrossmemberPorterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!$1,099.00 -
![]()
Porterbuilt Battery Box, Driver SideBattery Box for Optima Yellow Top
Driver Side Learn More$169.00 -
![]()
Porterbuilt Battery Box, Passenger SideBattery Box for Optima Yellow Top
Passenger Side Learn More$169.00 -
![]()
Porterbuilt 1967-72 Hood HingesThe Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed.
Learn More$425.00 -
![]()
-5%Porterbuilt Air Management BracketsFrame mounted brackets that hold one compressor and 3 gallon tank.
Includes 2 brackets.
Tanks & compressors not included. Learn Morewas $199.00 Special Price $189.00 -
![]()
Porterbuilt 1967-72 Hood HingesThe Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed.
Learn More$425.00 -
![]()
Porterbuilt 1960-66 Hood HingesThe Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed.
Learn More$425.00 -
![]()
CPP 1963-87 Chevy Truck Front Coil Springs, Stock HeightThese high quality coil springs from CPP come black powdercoated.
Available in stock height, 1" drop, 2" drop, or 3" drop. Learn More$149.00 -
![]()
CPP 1963-87 Chevy Truck Front Coil Springs, 1'' DropThese high quality coil springs from CPP come black powdercoated.
Available in stock height, 1" drop, 2" drop, or 3" drop. Learn More$149.00 -
![]()
CPP 1963-87 Chevy Truck Front Coil Springs, 2'' DropThese high quality coil springs from CPP come black powdercoated.
Available in stock height, 1" drop, 2" drop, or 3" drop. Learn More$149.00 -
![]()
CPP 1963-87 Chevy Truck Front Coil Springs, 3'' DropThese high quality coil springs from CPP come black powdercoated.
Available in stock height, 1" drop, 2" drop, or 3" drop. Learn More$149.00 -
![]()
Porterbuilt 1963-72 Rear Frame Crossmember, TubularTubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1963-72 Chevy Trucks
Learn More$119.00 -
![]()
PB Fab 1963-72 Trailing Arm Crossmember, 2 Piece DriveshaftTubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Learn More$349.00 -
![]()
Porterbuilt 1963-72 Trailing Arm Crossmember, 2 Piece DriveshaftTubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Learn More$349.00 -
![]()
Porterbuilt SBC Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember SBC Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00 -
![]()
Porterbuilt BBC Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember BBC Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00 -
![]()
Porterbuilt LT Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember LT Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00 -
![]()
CPP 1960-72 Chevy Truck Rear Coil Springs, Stock HeightThese high quality coil springs from CPP come black powdercoated.
Available in stock height, 3" drop, 4" drop, or 5" drop. Learn More$149.00 -
![]()
CPP 1960-72 Chevy Truck Rear Coil Springs, 3" DropThese high quality coil springs from CPP come black powdercoated.
Available in stock height, 3" drop, 4" drop, or 5" drop. Learn More$149.00 -
![]()
CPP 1960-72 Chevy Truck Rear Coil Springs, 4" DropThese high quality coil springs from CPP come black powdercoated.
Available in stock height, 3" drop, 4" drop, or 5" drop. Learn More$149.00 -
![]()
CPP 1960-72 Chevy Truck Rear Coil Springs, 5" DropThese high quality coil springs from CPP come black powdercoated.
Available in stock height, 3" drop, 4" drop, or 5" drop. Learn More$149.00 -
![]()
CPP 1963-72 Coil Spring Kit (Front & Rear)CPP coil spring kits include front and rear coils.
Available in stock height, 1" drop, 2" drop, or 3" drop front springs.
Available in stock height, 3" drop, 4" drop, or 5" drop rear springs. Learn More$298.00 -
![]()
Dropmember Steering Linkage Kit, 3 Joints Plus Support BracketThis 3 joint steering linkage kit from Unisteer includes everything you need for your Dropmember equipped truck.
Learn More$380.00 -
![]()
CPP 1960-72 Chevy Truck Rear Coil Springs, 4" Drop Heavy DutyThese high quality coil springs from CPP come black powdercoated.
Available in stock height, 3" drop, 4" drop, or 5" drop. Learn More$149.00 -
![]()
Porterbuilt Raised Bed Floor Mounts - 1963-72Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
NOW INCLUDES MOUNTING BRACKETS FOR BOYD FUEL TANK Learn More$649.00 -
![]()
Porterbuilt Raised Bed Floor Mounts - 1973-87Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
NOW INCLUDES MOUNTING BRACKETS FOR BOYD FUEL TANK Learn More$649.00 -
![]()
PB Fab 1963-72 Boxed Trailing Arm Crossmember, 2 Piece DriveshaftReplace your factory trailing crossmember with this fabricated version from Porterbuilt with added ground clearance.
Designed for a 2 piece driveshaft.
Learn More$349.00 -
![]()
Porterbuilt 1963-72 Boxed Trailing Arm Crossmember, 2 Piece DriveshaftReplace your factory trailing crossmember with this fabricated version from Porterbuilt with added ground clearance.
Designed for a 2 piece driveshaft.
Learn More$349.00 -
![]()
Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, AirbagPorterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY$1,099.00 -
![]()
Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, CoiloverPorterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY$1,099.00 -
![]()
Ridetech HQ Shock 22159845 - 5.75" Stroke - Stud MountDROPMEMBER COMPATIBLE
The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!
Learn More
Designed to replace OEM Shock Absorbers. Sold Individually$255.00 -
![]()
Ridetech HQ Shock 22169841- 5.7'' Stroke - Eye MountDROPMEMBER COMPATIBLE
The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!
Learn More
Designed to replace OEM Shock Absorbers. Sold Individually$255.00
