Search results for: 'C10 drop kit'
- Related search terms
- C10 rear springs
- C10 suspension
- C10 steel spindles
- C10 air ride kits
- c10 style single
- Porterbuilt 1973-87 C10 Rear Dropmember - Level 3 Extreme, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
Ride Height - 4"
Learn More
Deflated Height - Lay Frame$2,399.00 - Porterbuilt 1963-72 C10 Rear Dropmember - Level 1 Mild, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More
Deflated Height - 3"$2,399.00 - Porterbuilt 1973-87 C10 Rear Dropmember - Level 1 Mild, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More
Deflated Height - 3"$2,399.00 - Ridetech 1973-1987 Chevy C10 - StrongArms Front UpperStrongArms are built with all of the care and experience you have come to expect from us, thesetubular control arms are a precision engineered solution. Learn More$500.00
- Ridetech 1973-1987 Chevy C10 - StrongArms Front LowerStrongArms are built with all of the care and experience you have come to expect from us, thesetubular control arms are a precision engineered solution. Learn More$700.00
- Air Fitting Kit 3/8" Air LineIncludes Four SMC 3/8" PTC Fittings (D.O.T. Approved)
5 Options available:
Four 1/2" npt x 3/8" PTC Air Fittings - Elbow Male
Four 1/2" npt x 3/8" PTC Air Fittings - Straight Male
Two 1/2" npt x 3/8" PTC Elbow & Two 1/2" npt x 3/8" PTC Straight
Two 1/2" npt x 3/8" PTC Elbow & Two 1/4" npt x 3/8" PTC Elbow
Two 1/2" npt x 3/8" PTC Straight & Two 1/4" npt x 3/8" PTC Elbow Learn More$26.00 - PB Fab 1967-72 C10 Core Support Crossmember
Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Learn More$119.00 - PB Fab 1963-66 C10 Core Support Crossmember
Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Learn More$119.00 - Porterbuilt Front Swaybar - Version 7 DropmemberPorterbuilt front swaybar for 1963-87 Version 7 Dropmember equipped trucks.
Fits Level 2 Coilover and Level 3 airbag kits only!
DOES NOT FIT LEVEL 1 DROPMEMBER KITS! Learn More$349.00 - CPP Power Steering Slow Flow Valve KitsCPP Power Steering Fitting
Straight, Steel, Zinc Finish
5/8 in.-18 UNF Male Threads
-6 AN Male Threads
GM Learn More$19.99 - Accuair Ultimate Air Suspension PackageAccuAir’s Ultimate Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, ride height sensors, and a TouchPad+. This is the perfect top-of-the-line kit for anyone looking to get the best components for their air suspension management. Learn More$3,499.99
- PB Fab 1963-72 Boxed Trailing Arm Crossmember, 2 Piece Driveshaft
Replace your factory trailing crossmember with this fabricated version from Porterbuilt with added ground clearance.
Designed for a 2 piece driveshaft.
Learn More$349.00 - Porterbuilt 1963-72 Boxed Trailing Arm Crossmember, 2 Piece Driveshaft
Replace your factory trailing crossmember with this fabricated version from Porterbuilt with added ground clearance.
Designed for a 2 piece driveshaft.
Learn More$349.00 - Unisteer Power Rack & Pinion, Standard RatioPower Rack & Pinion for Use With Porterbuilt Dropmember Kits
This power rack and pinion comes with Unisteer's Limited Lifetime Warranty. Learn More$690.00 - CPP Power Rack & Pinion
This power rack and pinion from CPP is new, not a rebuilt or remanufactured rack.
Learn More
This rack works with all Dropmember kits$349.00 - Accuair Starter Air Suspension PackageThe Accuair Starter Package is going to include an ENDO-T air tank and an e+ Connect which includes an ECU+, wireless switch box, and e-Level+ app. This is the perfect introductory kit for anyone looking to get a high-quality air management system without breaking the bank. Learn More$2,399.95
- Accuair Premium Air Suspension PackageThe Accuair Premium Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, and height sensors. This is the perfect mid-level kit for anyone looking to get a high-quality air management system and programmable ride heights at an affordable price. Learn More$2,999.99
- Porterbuilt Raised Bed Floor Mounts - 1963-72Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
NOW INCLUDES MOUNTING BRACKETS FOR BOYD FUEL TANK Learn More$649.00 - Porterbuilt Raised Bed Floor Mounts - 1973-87Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
NOW INCLUDES MOUNTING BRACKETS FOR BOYD FUEL TANK Learn More$649.00 - Porterbuilt 1963-87 1" Forward & 1" Narrowed Control Arms - Factory Crossmember
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" FORWARD & 1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!$1,099.00 - Porterbuilt 1963-87 1" Forward & 1" Narrowed Control Arms - Factory Crossmember
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" FORWARD & 1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!$1,099.00 - Dropmember LS Swap Stainless Headers
These stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LS swap in your 1963-87 Chevy truck.
Learn More$329.00 - Dropmember LS Swap Longtube Stainless Headers
These longtube stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LS swap in your 1963-87 Chevy truck.
Learn More$449.00 - Dropmember LT Swap Stainless Headers
These stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LT swap in your 1963-87 Chevy truck.
Learn More$329.00 - Vintage Air Front Runner Drive System - LS EngineVintage Air Front Runner™ drive systems are engineered for maximum Performance First. These are not merely appearance or dress-up components. They are the essence of form following function. Learn More$2,975.00
- Airlift 3H Air Management System (27690, 27695)
Air Lift Performance 3H combines pressure-based control with ride-height sensing technology. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems – instantly improving suspension control, performance, and vehicle ride flexibility.
Learn More$2,065.00 - Airlift 3P Air Management System (27685)
Air Lift Performance 3P combines pressure-based control with the ability to add ride-height sensing technology with the upgrade to height sensors. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems – instantly improving suspension control, performance, and vehicle ride flexibility.
Learn More$1,655.00 - Holley GM LS Retrofit Engine Oil Pan 302-2Holley 302-2 GM LS Retrofit Oil Pan
Low Profile, Aluminum, Natural, 3.620 in. Stroke, 5.7 Quarts
Fits Chevy LS, 4.8, 5.3, 6.0L
Required on Dropmember equipped trucks with an LS Swap Learn More$485.00 - Porterbuilt 1960-62 Transmission Crossmember
Porterbuilt tubular transmission crossmember for 1960-62 Chevy trucks.
Learn More$119.00 - Porterbuilt 1963-87 Transmission CrossmemberPorterbuilt tubular transmission crossmember for 1963-87 Chevy trucks. Learn More$119.00
- Porterbuilt 1963-87 1" Narrowed Control Arms - Factory Crossmember
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!$1,099.00 - Porterbuilt Battery Box, Driver SideBattery Box for Optima Yellow Top
Driver Side Learn More$169.00 - Porterbuilt Battery Box, Passenger SideBattery Box for Optima Yellow Top
Passenger Side Learn More$169.00 - Porterbuilt 1967-72 Hood Hinges
The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed.
Learn More$425.00 - Porterbuilt Air Management BracketsFrame mounted brackets that hold one compressor and 3 gallon tank.
Includes 2 brackets.
Tanks & compressors not included. Learn Morewas $199.00 Special Price $189.00 - Porterbuilt 1967-72 Hood Hinges
The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed.
Learn More$425.00 - Porterbuilt 1960-66 Hood Hinges
The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed.
Learn More$425.00 - Porterbuilt 1963-72 Rear Frame Crossmember, Tubular
Tubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1963-72 Chevy Trucks
Learn More$119.00 - PB Fab 1963-72 Trailing Arm Crossmember, 2 Piece Driveshaft
Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Learn More$349.00 - Porterbuilt 1963-72 Trailing Arm Crossmember, 2 Piece Driveshaft
Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Learn More$349.00 - Porterbuilt SBC Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember SBC Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00 - Porterbuilt BBC Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember BBC Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00 - Porterbuilt LT Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember LT Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00 - Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, Airbag
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY$1,099.00 - Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, Coilover
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY$1,099.00 - Ridetech HQ Shock 22159845 - 5.75" Stroke - Stud Mount
DROPMEMBER COMPATIBLE
The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!
Learn More
Designed to replace OEM Shock Absorbers. Sold Individually$255.00 - Ridetech HQ Shock 22169841- 5.7'' Stroke - Eye Mount
DROPMEMBER COMPATIBLE
The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!
Learn More
Designed to replace OEM Shock Absorbers. Sold Individually$255.00