Search results for: 'steering column shift'
- Related search terms
- Steering+joint
- Steering joint
- Steering wheel
- Steering pump bracket
- Steering column parts
- Dropmember Steering Linkage Kit, 3 Joints Plus Support Bracket
This 3 joint steering linkage kit from Unisteer includes everything you need for your Dropmember equipped truck.
Learn More$380.00 - CPP Power Steering Slow Flow Valve KitsCPP Power Steering Fitting
Straight, Steel, Zinc Finish
5/8 in.-18 UNF Male Threads
-6 AN Male Threads
GM Learn More$19.99 - Porterbuilt 1963-72 Fully Adjustable Trac-bar Kit
If you are thinking about lowering your C10 truck more than four inches in the rear, a longer trac-bar will be a necessity! The Porterbuilt Fully Adjustable Trac-bar has an overall length of just over 34 inches. The longer the bar, the less side to side shift the differential will experience through suspension travel. The new mounting brackets also relocate the bar lowering the rear roll-center, and the bar length can be tuned while still mounted on the truck!
Learn More$299.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 1 Mild, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approximately 7-8" off of the ground at ride height.Ride Height - 7-8"
Learn More$1,399.00 - Porterbuilt 1973-87 C10 Front Dropmember - Level 1 Mild, Coilover
The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approximately 7-8" off of the ground at ride height.Ride Height - 7-8"
Learn More$1,399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 2 Touring, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.Ride Height - 5-6"
Learn More$1,399.00 - Porterbuilt 1973-87 C10 Front Dropmember - Level 2 Touring, Coilover
The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.Ride Height - 5-6"
Learn More$1,399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 2 Touring, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.Ride Height - 5-6"
Learn More$1,399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 3 Extreme
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.Ride Height - 4"
Deflated Height - Lay Frame
Learn More$1,399.00 - Porterbuilt 1973-87 C10 Front Dropmember - Level 3 Extreme
The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.Ride Height - 4"
Deflated Height - Lay Frame
Learn More$1,399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 3 Extreme
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.Ride Height - 4"
Deflated Height - Lay Frame
Learn More$1,399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 1 Mild, Airbag
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the lowest point of the factory frame rails approximately 3" off of the ground when fully deflated.Ride Height - 6-7"
Deflated Height - 3"
Learn More$1,399.00 - Porterbuilt 1973-87 C10 Front Dropmember - Level 1 Mild, Airbag
The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the lowest point of the factory frame rails approximately 3" off of the ground when fully deflated.Ride Height - 6-7"
Deflated Height - 3"
Learn More$1,399.00 - Wilwood 1963-70 Chevy C10 Aluminum ProSpindlesWilwood’s ProSpindle Kits contain a pair of Modular Spindles, steering arms and hubs assemblies for either 63-70 or 71-87 Chevrolet & GMC 2WD C10/C15 Pickups and Suburban’s.
REQUIRES THE USE OF 1973-87 C10 BALL JOINTS Learn More$808.49 - Wilwood 1971-87 Chevy C10 ProSpindlesWilwood’s ProSpindle Kits contain a pair of Modular Spindles, steering arms and hubs assemblies for either 63-70 or 71-87 Chevrolet & GMC 2WD C10/C15 Pickups and Suburban’s.
REQUIRES THE USE OF 1973-87 C10 BALL JOINTS Learn More$808.49 - Porterbuilt 1960-62 Chevy Truck Front Dropmember - Coilovers
Porterbuilt's 1960-62 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front Coilover system will set the lowest point of the factory frame rails approx. 5-6" inches off the ground at ride height.
Learn More$1,399.00 - Vintage Air Front Runner Drive System - LS EngineVintage Air Front Runner™ drive systems are engineered for maximum Performance First. These are not merely appearance or dress-up components. They are the essence of form following function. Learn More$2,975.00
- Dropmember LS Swap Stainless Headers
These stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LS swap in your 1963-87 Chevy truck.
Learn More$329.00 - Dropmember LS Swap Longtube Stainless Headers
These longtube stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LS swap in your 1963-87 Chevy truck.
Learn More$449.00 - Dropmember LT Swap Stainless Headers
These stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LT swap in your 1963-87 Chevy truck.
Learn More$329.00 - CPP Modular Drop Spindle Big Brake Wheel Kits, 13'' Rotor
CPP Modular Drop Spindle Big Brake Wheel Kits
Learn More
1960-87 Trucks
13" Rotors
2 Piston Caliper
5 or 6 Lug$1,099.00 - CPP Modular Spindle Front Brake Kit, 12" Rotors, 1963-70 C10 - 6370SWBK-5CPP Modular Spindle Front Brake Kit
12" Rotors, Drilled & Slotted Available
2 Piston Calipers
18" Minimum Wheel Diameter Learn More$799.00 - CPP Modular Spindle Front Brake Kit, 12" Rotors, 1971-72 C10 - 7172SWBK-5CPP Modular Spindle Front Brake Kit
12" Rotors, Drilled & Slotted Available
2 Piston Calipers, Wilwood Upgrade Available
18" Minimum Wheel Diameter Learn More$799.00 - CPP Modular Spindle Front Brake Kit, 12" Rotors, 1973-87 C10 - 7387SWBK-5CPP Modular Spindle Front Brake Kit
12" Rotors, Drilled & Slotted Available
2 Piston Calipers, Wilwood Upgrade Available
18" Minimum Wheel Diameter Learn More$799.00 - CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1963-70 C10 - 6370SWBK-5WWBCPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Black Calipers
18" Minimum Wheel Diameter Learn More$1,199.00 - CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1963-70 C10 - 6370SWBK-5WWRCPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Red Calipers
18" Minimum Wheel Diameter Learn More$1,199.00 - CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1971-72 C10 - 7172SWBK-5WWRCPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Red Calipers
18" Minimum Wheel Diameter Learn More$1,199.00 - CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1971-72 C10 - 7172SWBK-5WWBCPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Black Calipers
18" Minimum Wheel Diameter Learn More$1,199.00 - CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1973-87 C10 - 7387SWBK-5WWBCPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Black Calipers
18" Minimum Wheel Diameter Learn More$1,199.00 - CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1973-87 C10 - 7387SWBK-5WWRCPP Modular Drop Spindle Front Brake Kit
12" Rotors, Drilled & Slotted
Wilwood 2 Piston Red Calipers
18" Minimum Wheel Diameter Learn More$1,199.00 - Holley GM LS Retrofit Engine Oil Pan 302-2Holley 302-2 GM LS Retrofit Oil Pan
Low Profile, Aluminum, Natural, 3.620 in. Stroke, 5.7 Quarts
Fits Chevy LS, 4.8, 5.3, 6.0L
Required on Dropmember equipped trucks with an LS Swap Learn More$485.00