Shop By Category
- Porterbuilt 1973-87 C10 Longbed to Shortbed Conversion Kit1973-87 Longbed to Shortbed Conversion Kit
Includes templates, c-channel supports, and frame plate.
Welding is required. Learn More$399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 2 Touring, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.Ride Height - 5-6"
Learn More$1,399.00 - Inland Empire Driveline IE210527XS Super Strength Carrier BearingInland Empire Driveline super strength bearing supports are the preferred carrier bearing for Dropmember equipped trucks.
Pedestal Style
Polyurethane Cushion
Bearing ID 1.181
Learn More$160.35 - Holley GM LS Retrofit Engine Oil Pan 302-2Holley 302-2 GM LS Retrofit Oil Pan
Low Profile, Aluminum, Natural, 3.620 in. Stroke, 5.7 Quarts
Fits Chevy LS, 4.8, 5.3, 6.0L
Required on Dropmember equipped trucks with an LS Swap Learn More$485.00 - Air Fitting Kit 3/8" Air LineIncludes Four SMC 3/8" PTC Fittings (D.O.T. Approved)
5 Options available:
Four 1/2" npt x 3/8" PTC Air Fittings - Elbow Male
Four 1/2" npt x 3/8" PTC Air Fittings - Straight Male
Two 1/2" npt x 3/8" PTC Elbow & Two 1/2" npt x 3/8" PTC Straight
Two 1/2" npt x 3/8" PTC Elbow & Two 1/4" npt x 3/8" PTC Elbow
Two 1/2" npt x 3/8" PTC Straight & Two 1/4" npt x 3/8" PTC Elbow Learn More$26.00 - Vintage Air Front Runner Drive System - LS EngineVintage Air Front Runner™ drive systems are engineered for maximum Performance First. These are not merely appearance or dress-up components. They are the essence of form following function. Learn More$2,975.00
- Brake Booster Kit - 1960-66 C107" Dual Diaphragm Brake Booster with optional Wilwood Aluminum Tandem Master Cylinder Kit
Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
Master Cylinder includes proportioning valve and bracket
Learn More$189.99 - Brake Booster Kit - 1967-72 C107" Dual Diaphragm Brake Booster with optional Wilwood Aluminum Tandem Master Cylinder Kit
Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
Master Cylinder includes proportioning valve and bracket
Learn More$194.99 - Accuair Starter Air Suspension PackageThe Accuair Starter Package is going to include an ENDO-T air tank and an e+ Connect which includes an ECU+, wireless switch box, and e-Level+ app. This is the perfect introductory kit for anyone looking to get a high-quality air management system without breaking the bank. Learn More$2,399.95
- Accuair Premium Air Suspension PackageThe Accuair Premium Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, and height sensors. This is the perfect mid-level kit for anyone looking to get a high-quality air management system and programmable ride heights at an affordable price. Learn More$2,999.99
- Accuair Ultimate Air Suspension PackageAccuAir’s Ultimate Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, ride height sensors, and a TouchPad+. This is the perfect top-of-the-line kit for anyone looking to get the best components for their air suspension management. Learn More$3,499.99
- CPP Power Steering Slow Flow Valve KitsCPP Power Steering Fitting
Straight, Steel, Zinc Finish
5/8 in.-18 UNF Male Threads
-6 AN Male Threads
GM Learn More$19.99 - KYB Shock Kit - Stud/EyeKYB Shock Kit - 1924202
Includes 2 shocks plus mounting hardware. Learn More$165.00 - KYB Shock Kit - Eye/EyeKYB Shock Kit - 1924426
Includes 2 shocks plus mounting hardware. Learn More$165.00 - Dropmember LT Swap Stainless Headers
These stainless headers work with the Porterbuilt Dropmember and are required for clearance with the frame and steering components when performing an LT swap in your 1963-87 Chevy truck.
Learn More$329.00 - Porterbuilt SBC Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember SBC Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00 - Porterbuilt BBC Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember BBC Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00 - Porterbuilt LT Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember LT Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00 - Porterbuilt Version 7 Dropmember, LS GEN3 Motor MountsVersion 7 Dropmember GEN3 LS Motor Mounts Learn More$249.00
- Porterbuilt Front Swaybar - 63-72 C10 Factory CrossmemberPorterbuilt front swaybar for 1963-72 C10 Trucks running PB arms and a factory crossmember.
Learn More$349.00 - Porterbuilt Front Swaybar - 73-87 C10 Factory CrossmemberPorterbuilt front swaybar for 1973-87 C10 Trucks running PB arms and a factory crossmember.
Learn More$349.00 - Low Profile LSX Swap Oil Pan Kit, F-BodyLow Profile Oil Pan Kit
LSX Engine, F-Body Oil Pan
Fits 4.8L, 5.3L, 6.0L, 6.2L
Dropmember Compatible
Learn Morewas $349.00 Special Price $329.00 - Low Profile LT Swap Oil Pan KitLow Profile LT Oil Pan Kit
LT GEN V, A BODY, G BODY
Fits LT1, LT4, L83, L86, 5.3L, 6.2L
Dropmember Compatible Learn Morewas $379.00 Special Price $359.00 - Porterbuilt 1960-62 Chevy Truck Front Dropmember - Coilovers
Porterbuilt's 1960-62 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front Coilover system will set the lowest point of the factory frame rails approx. 5-6" inches off the ground at ride height.
Learn More$1,399.00 - 1963-72 Boxed Inner Frame Stiffener, 1 Piece DriveshaftNew Boxed Inner Frame Stiffener for Level 1 Dropmember, Static & Stock Suspension Trucks
Fits 1963-72 C10 Trucks Learn More$1,499.00 - Porterbuilt 1963-87 Transmission CrossmemberPorterbuilt tubular transmission crossmember for 1963-87 Chevy trucks. Learn More$119.00
- 1963-72 Chevy C10 Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI
Product Number: 14001
Approx 19 Gallons1963-72 Chevy C10
Standard
Bed Fill
Non-EFI* Shown With Optional Rollover Vent and Sending Unit Installed.
Learn More$388.00 - 1973-87 Chevy C10 Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI
Product Number: 14038
Approx 19 Gallons1973-87 Chevy C10
Standard
Bed Fill
Non-EFI* Pictures may show optional accessories installed. Depending upon the options you choose your tank may vary slightly from shown.
Learn More$388.00 - Porterbuilt 1963-87 1" Narrowed Control Arms - Factory Crossmember
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!$1,099.00 - Porterbuilt 1963-72 C10 Rear Dropmember - Level 1 Mild, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More
Deflated Height - 3"$2,399.00 - Porterbuilt 1963-87 1" Forward & 1" Narrowed Control Arms - Factory Crossmember
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" FORWARD & 1" NARROWED
FOR FACTORY CROSSMEMBER ONLY!$1,099.00 - Porterbuilt 1963-72 C10 Rear Dropmember - Level 3 Extreme, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
Ride Height - 4"
Learn More
Deflated Height - Lay Frame$2,399.00 -
- Porterbuilt 1963-72 C10 Rear Dropmember - Level 1 Coilover
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More$2,399.00 - Porterbuilt 1963-72 C10 Rear Dropmember - Level 2 Coilover
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
Ride Height - 5-6"
Learn More$2,399.00 -
- Porterbuilt 1973-87 C10 Rear Dropmember - Level 1 Mild, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More
Deflated Height - 3"$2,399.00 - Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, Airbag
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY$1,099.00 - Elbow Male - 1/2" npt x 3/8" PTC Air Fitting (DOT Approved) - KV2L11-37SElbow Male - 1/2" npt x 3/8" PTC Air Fitting (DOT Approved) - KV2L11-37S Learn More$7.99
- Porterbuilt 1973-87 C10 Rear Dropmember - Level 3 Extreme, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
Ride Height - 4"
Learn More
Deflated Height - Lay Frame$2,399.00 - Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, Coilover
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY$1,099.00 - Elbow Male - 3/8" npt x 1/4" PTC Air Fitting (DOT Approved) - KV2L07-36SElbow Male - 3/8" npt x 1/4" PTC Air Fitting (DOT Approved) - SMC KV2L07-36S Learn More$4.99
- Elbow Male - 1/4" npt x 3/8" PTC Air Fitting (DOT Approved) - KV2L11-35SElbow Male - 1/4" npt x 3/8" PTC Air Fitting (DOT Approved) - KV2L11-35S Learn More$6.99
- Elbow Male - 1/4" npt x 1/4" PTC Air Fitting (DOT Approved) - KV2L07-35SElbow Male - 1/4" npt x 1/4" PTC Air Fitting (DOT Approved) - KV2L07-35S Learn More$4.49