Search results for: 'Fuel system'
- Related search terms
- fuel+tankcallto:6232821090'A=0
- fuel tankcallto:6232821090'A=0
- Fuel tank mount
- Fuel line
- Fuel tank mount kit
- 1973-87 Chevy C10 Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI
Product Number: 14038
Approx 19 Gallons1973-87 Chevy C10
Standard
Bed Fill
Non-EFI* Pictures may show optional accessories installed. Depending upon the options you choose your tank may vary slightly from shown.
Learn More$388.00 - 1973-87 Chevy C10 Boyd Aluminum Fuel Tank, Side Fill, Non-EFI
Product Number: 14039
Approx 19 Gallons1973-87 Chevy C10
Standard
Side Fill
Non-EFI* Pictures may show optional accessories installed. Depending upon the options you choose your tank may vary slightly from shown.
Learn More$388.00 - 1963-72 Chevy C10 Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI
Product Number: 14001
Approx 19 Gallons1963-72 Chevy C10
Standard
Bed Fill
Non-EFI* Shown With Optional Rollover Vent and Sending Unit Installed.
Learn More$388.00 - 1963-72 Chevy C10 Boyd Aluminum Fuel Tank, Side Fill, Non-EFI
Product Number: 14002
Approx 19 Gallons1963-72 Chevy C10
Standard
Side Fill
Non-EFI* Shown With Optional Rollover Vent and Sending Unit Installed.
Learn More$388.00 - Airlift 3H Air Management System (27690, 27695)
Air Lift Performance 3H combines pressure-based control with ride-height sensing technology. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems – instantly improving suspension control, performance, and vehicle ride flexibility.
Learn More$2,065.00 - 1963-72 Chevy C10 Boyd Aluminum Fuel Tank, Side Fill, EFI Aeromotive Stealth 340 Pump
Product Number: 14003
Approx 19 Gallons1963-72 Chevy C10
Learn More
Side Fill
Aeromotive In-Tank Pump$720.00 - Airlift 3P Air Management System (27685)
Air Lift Performance 3P combines pressure-based control with the ability to add ride-height sensing technology with the upgrade to height sensors. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems – instantly improving suspension control, performance, and vehicle ride flexibility.
Learn More$1,655.00 - Vintage Air Front Runner Drive System - LS EngineVintage Air Front Runner™ drive systems are engineered for maximum Performance First. These are not merely appearance or dress-up components. They are the essence of form following function. Learn More$2,975.00
- 1973-87 Chevy C10 Boyd Aluminum Fuel Tank, Side Fill, EFI Aeromotive Stealth 340 Pump
Product Number: 14041
Approx 19 Gallons1973-87 Chevy C10
Learn More
Side Fill
Aeromotive In-Tank Pump$720.00 - Porterbuilt Raised Bed Floor Mounts - 1963-72Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
NOW INCLUDES MOUNTING BRACKETS FOR BOYD FUEL TANK Learn More$649.00 - Porterbuilt Raised Bed Floor Mounts - 1973-87Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
NOW INCLUDES MOUNTING BRACKETS FOR BOYD FUEL TANK Learn More$649.00 - Porterbuilt 1963-72 C10 Rear Dropmember - Level 2 Coilover
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
Ride Height - 5-6"
Learn More$2,399.00 - Porterbuilt 1963-72 C10 Rear Dropmember - Level 1 Coilover
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More$2,399.00 - Porterbuilt 1963-72 C10 Rear Dropmember - Level 3 Extreme, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
Ride Height - 4"
Learn More
Deflated Height - Lay Frame$2,399.00 - Porterbuilt 1973-87 C10 Rear Dropmember - Level 3 Extreme, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
Ride Height - 4"
Learn More
Deflated Height - Lay Frame$2,399.00 - Porterbuilt 1963-72 C10 Rear Dropmember - Level 1 Mild, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More
Deflated Height - 3"$2,399.00 - Porterbuilt 1973-87 C10 Rear Dropmember - Level 1 Mild, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More
Deflated Height - 3"$2,399.00 - Ridetech 1963-72 Chevy C10 Air Suspension - Level 3The Ridetech Level 3 system includes the best of every option they have to offer. Upgrades like StrongArms, MuscleBars, and the RidePRO control system are included. Spindles designed for the "HD" 1.25" brake rotor package. Learn More$10,600.00
- Porterbuilt 1960-62 C10 Rear Dropmember - Level 3 ExtremeThe Porterbuilt Dropmember Level 3 1960-62 Chevy Pickup Rear suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel). Learn More$2,399.00
- Ridetech 1963-72 Chevy C10 Air Suspension - Level 2The Ridetech Level 2 system adds their very popular STRONGARM™ tubular control arms. This is a great way to take your vintage truck and give it modern handling. Learn More$7,000.00
- Accuair Starter Air Suspension PackageThe Accuair Starter Package is going to include an ENDO-T air tank and an e+ Connect which includes an ECU+, wireless switch box, and e-Level+ app. This is the perfect introductory kit for anyone looking to get a high-quality air management system without breaking the bank. Learn More$2,399.95
- Boyd Welding Bed Floor Fill KitCap:
- Material = 6061 CNC Machined Aluminum
- Threads = 11.5" TPI
- Vented= NO
- Lanyard = NO
- Gasket = Buna O-ring
Neck:
- Material= 6061 CNC Machined Aluminum
- Threads= 11.5"
- OD = 4.975" Overall Flange
- ID = 3.300 ID
- Overall Height = 2.5"
- Bolt Hole = x6 .201 THRU 4.350" BCL
Learn More$105.00 - Porterbuilt 1963-72 Rear Frame Crossmember, Tubular
Tubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1963-72 Chevy Trucks
Learn More$119.00 - Porterbuilt 1960-62 Chevy Truck Front Dropmember - Coilovers
Porterbuilt's 1960-62 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front Coilover system will set the lowest point of the factory frame rails approx. 5-6" inches off the ground at ride height.
Learn More$1,399.00 - Accuair Premium Air Suspension PackageThe Accuair Premium Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, and height sensors. This is the perfect mid-level kit for anyone looking to get a high-quality air management system and programmable ride heights at an affordable price. Learn More$2,999.99
- Accuair Ultimate Air Suspension PackageAccuAir’s Ultimate Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, ride height sensors, and a TouchPad+. This is the perfect top-of-the-line kit for anyone looking to get the best components for their air suspension management. Learn More$3,499.99
- CPP Rear Big Brake Kit, 12'' Rotor
CPP Rear Big Brake Kit
Learn More
1963-87 Trucks
12" Rotors
5 or 6 Lug & Ford 9"$699.00 - Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit, 14" Rotors - 140-10012Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit
14" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Big Ford New Style Rear End Axle Flange (Torino), 2.50 Offset
18" Minimum Wheel Diameter Learn MoreAs low as $2,118.49 - Wilwood Forged Dynalite Rear Brake Kit, 12.19" Rotors - 140-10094Wilwood Forged Dynalite Rear Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
15" Minimum Wheel Diameter Learn MoreAs low as $978.86 - Porterbuilt 1963-72 C10 Front Dropmember - Level 2 Touring, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.Ride Height - 5-6"
Learn More$1,399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 1 Mild, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approximately 7-8" off of the ground at ride height.Ride Height - 7-8"
Learn More$1,399.00 - Porterbuilt 1973-87 C10 Front Dropmember - Level 1 Mild, Coilover
The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approximately 7-8" off of the ground at ride height.Ride Height - 7-8"
Learn More$1,399.00 - Porterbuilt 1973-87 C10 Front Dropmember - Level 2 Touring, Coilover
The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.Ride Height - 5-6"
Learn More$1,399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 2 Touring, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.Ride Height - 5-6"
Learn More$1,399.00 - Wilwood D154 Rear Brake Kit, 12.19" Rotors - 140-12569Wilwood D154 Rear Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
2 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
16" Minimum Wheel Diameter
Learn MoreAs low as $897.68 - Wilwood D154 Rear Brake Kit, 12.19" Rotors - 140-12209Wilwood D154 Rear Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
2 Piston Calipers, Red or Black Available
Big Ford New Style Rear End Axle Flange (Torino), 2.50 Offset
16" Minimum Wheel Diameter
Learn MoreAs low as $897.68 - Wilwood Forged Dynalite Rear Brake Kit, 12.19" Rotors, 6 Lug - 140-16712Wilwood Forged Dynalite Rear Parking Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2.46 Offset
15" Minimum Wheel Diameter Learn MoreAs low as $1,090.11 - Wilwood Forged Narrow Superlite 4R Rear Brake Kit, 12.88" Rotors - 140-10093Wilwood Forged Narrow Superlite 4R Rear Brake Kit
12.88" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
17" Minimum Wheel Diameter Learn MoreAs low as $1,947.24 - Wilwood Forged Dynapro Rear Brake Kit, 11" Rotors - 140-11385Wilwood Forged Dynapro Low-Profile Rear Brake Kit
11" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
14" Minimum Wheel Diameter Learn MoreAs low as $978.86 - Wilwood Forged Dynapro Rear Brake Kit, 11" Rotors, 6 Lug - 140-16711Wilwood Forged Dynapro Low-Profile Rear Brake Kit
6 Lug
11" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2.46 Offset
14" Minimum Wheel Diameter Learn MoreAs low as $1,092.61 - Porterbuilt 1963-72 C10 Front Dropmember - Level 3 Extreme
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.Ride Height - 4"
Deflated Height - Lay Frame
Learn More$1,399.00 - Porterbuilt 1973-87 C10 Front Dropmember - Level 3 Extreme
The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.Ride Height - 4"
Deflated Height - Lay Frame
Learn More$1,399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 3 Extreme
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.Ride Height - 4"
Deflated Height - Lay Frame
Learn More$1,399.00 - Porterbuilt 1963-72 C10 Front Dropmember - Level 1 Mild, Airbag
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the lowest point of the factory frame rails approximately 3" off of the ground when fully deflated.Ride Height - 6-7"
Deflated Height - 3"
Learn More$1,399.00 - Porterbuilt 1973-87 C10 Front Dropmember - Level 1 Mild, Airbag
The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the lowest point of the factory frame rails approximately 3" off of the ground when fully deflated.Ride Height - 6-7"
Deflated Height - 3"
Learn More$1,399.00 - Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit, 12.88" Rotors - 140-9219Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit
12.88" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Big Ford New Style Rear End Axle Flange (Torino), 2.50 Offset
17" Minimum Wheel Diameter Learn MoreAs low as $1,947.24 - Brake Booster Kit - 1960-66 C107" Dual Diaphragm Brake Booster with optional Wilwood Aluminum Tandem Master Cylinder Kit
Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
Master Cylinder includes proportioning valve and bracket
Learn More$189.99 - Brake Booster Kit - 1967-72 C107" Dual Diaphragm Brake Booster with optional Wilwood Aluminum Tandem Master Cylinder Kit
Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
Master Cylinder includes proportioning valve and bracket
Learn More$194.99 - Ridetech 1973-1987 Chevy C10 - StrongArms Front UpperStrongArms are built with all of the care and experience you have come to expect from us, thesetubular control arms are a precision engineered solution. Learn More$500.00
- Ridetech 1973-1987 Chevy C10 - StrongArms Front LowerStrongArms are built with all of the care and experience you have come to expect from us, thesetubular control arms are a precision engineered solution. Learn More$700.00